Radon Seed Sterilizer (1930s - 1940s)

The Muir Safe-Sterilizer manufactured by the Radium Emanation Corporation of New York City, either in the 1930s or 1940s.

Prior to being implanted in a patient, radon seeds needed to be sterilized. The sterilization was accomplished by opening the sterilizer unit and placing the seeds on the screen. The device was then screwed shut and submersed in the sterilizing solution - usually hot water. The solution entered the sterilizer while the air was displaced through three small holes in the bottom (not shown).

Size: ca. 1.5" diameter, 0.75" thick

Kindly donated by Dr. Pejavar Rao.

The following drawing is taken from the 1933 U.S. Patent.

References

U.S. Patent 1,921,084. Sterilization of Radon Seeds. August 8, 1933.

Brachytherapy                Museum Directory

Last updated: 01/20/09
Copyright 1999, Oak Ridge Associated Universities